Samlexpower EVO-2212E Owner's Manual - Section 4 |
12 | SAMLEX AMERICA INC.
APPENDIX A
SECtION 4 |
Parameter Setup
4.0 GRoUP AnD PARAMeteR SetUP MenUS
Up to 52 operating parameters (Figs 4.1 and 4.2) can be programmed to suit the desired
operating conditions.
The operating parameters have been organized in 7 “Select Group” Menus (Groups 1 to 7)
as shown in Parameter Setup Menu Maps at Fig 4.1 for Groups 1 to 4 and Fig 4.2 for Groups
5 to 7. For convenience, each Parameter Setup Screen in Figs 4.1 and 4.2 can be referenced
by 2 co-ordinates: Group No. (Column) and Page No. (Row).
The desired Parameter Setup Screen can be reached by navigating through the “Select
Group” Menus as shown in the Select Group Menu Map at Fig 4.3.
inFo
in this section, parameter set up procedures have been explained using LcD screen
displays with information as seen on the actual LDc screens. All parameters shown
on the second row of the screen displays are the default parameters. All voltage values
related to battery voltages are the default values for 12V versions eVo-2212/3012.
(Double these values for the 24V versions eVo-2224/4024)