Campbell CCFC Instruction Manual - page 106
Other manuals for CCFC:
Instruction Manual
Manual is about: field camera
of
132
CCFC Field Camera
A-1
Figure 13-1 PakBus Settings
The CCFC Power I/O port is configured by default to provide a 3-
wire RS-232 connection (Tx, Rx, Ground), as well as power. The
wires can be terminated directly on the control ports of a
compatible datalogger. For connection to a computer’s 9 pin
serial port, use the L28840 DB9 FEMALE to Terminal Block
Adaptor, which facilitates the connection of the cable pigtail end
to a computer 9-pin serial port. The adaptor is included with the
CCFC.
Figure 13-2 L28840 DB9 FEMALE to Terminal Block
Adapter