Campbell CCFC Instruction Manual - page 93
CCFC Field Camera
82
Table 12-25 Ethernet Power Modes
Power
Mode
Operating Characteristics
Always On
This power mode offers the maximum availability of the Ethernet
port. If the camera is in the Fully On power state or the Partially
On power state, then the Ethernet port will always be on and
available for communications.
Moderate
Power Save
Mode
This power mode offers some power savings on the Ethernet port.
This mode is only recommended if the camera is in Partially On
power mode. If the camera is in the Partially On power mode,
then incoming data packets will wake up the camera for
communications.
Full Power
Save Mode
This power mode should be used if the lowest power consumption
is desired and incoming Ethernet communications are not
required. File transfers after a capture still function properly.
12.8.4.3 Wi-Fi Power Mode
Wi-Fi Power Mode allows a user to select how much power the
camera uses when the camera set to Wi-Fi Access Point in the
network settings. There are three power mode options to choose
from.
Figure 12-40 Wi-Fi Power Mode
The default setting for the Wi-Fi Power Mode is Always On.