Campbell CCFC Instruction Manual - page 58
CCFC Field Camera
A-1
Sensitivity
1 to 99
Experimenting with values is the best method for
determining where to set the level for the desired
application. A Value of 1 is the least sensitive, but less
prone to false triggers. A Value of 99 is the most sensitive
and is most susceptible to false triggers.
Schedule
Continuous (24hr)
Allows photos to be captured continuously (24 hours).
Scheduled
Scheduled by entering a value in minutes in Take Photo
Every.
Lens Position
Checkbox
Select 1- 4 lens positions for the capture. See Section 12.5
Lens Position. Selecting the green position title opens the
Lens Position modal.
Enable Photo
Capture
Toggle between
On and Off
Initiate the capture of photos.
Take a Single
Photo
Take a photo at a defined time.
Take a Series of
Photos
Enter the Number of Images and Interval in Seconds (time
between photos) to create a photo burst. Maximum
allowable value is 60. This applies to each lens position,
so with all 4 lens positions activated, it will take 240
photos.
Save to
Camera
Memory
Toggle
Selecting Save to Camera enables the still photos to be
stored to the camera memory.
Max Space (MB)
Enter desired size (MB) out of 15185 MB.
Entering a value of ‘0” will auto allocate as much space as
possible.
Camera Memory
Management Type
Fill and Stop will stop recording additional photos once
the camera memory is full or the allocated memory size is
reached.
Continuous Overwrite management will start deleting the
oldest files once the camera memory is full or the
allocated memory size (max space setting from above) is
reached.
Sub Folder Date
Format
An option is given to store photos in a sub folder named
by YY/MM or YY/MM/DD. Selecting the YY/MM/DD
option has some performance advantages when a large
number of photos are taken. Reducing the number of files
in a folder speeds up the storing and file management
process. Speed advantages are only noticeable if the
number of files in the YY/MM folder will exceed 1000.