Campbell CCFC Instruction Manual - page 18
CCFC Field Camera
A-1
b. Partially On – Provides substantial reduction in power
(especially with the Ethernet Power Mode set to Full Power
Save).
c. Deep Sleep – Provides very good power savings. The camera
does not need to reboot when activated by a trigger.
Recommended for use if more than 24 triggers are expected per
day.
d. Off Mode – Offers the best power savings. Useful, if less
than 24 photos or video captures are required per day. It takes
about 90 seconds for the camera to wake up to start acquiring a
picture.
Table 4-1 Power Mode Summary*
Power
Mode
Ethernet
Power
Save
Mode
Quiescent
Current
Draw
Max.@12
Vdc
Time (Seconds)
from wakeup
to start of
capture
Time (Seconds) in
Fully On Mode
(Active Current
Draw)
Fully On
Always
On
250 mA
< 1
0 – Always Active
Full
Power
Save
Mode
200 mA
< 1
0 – Always Active
Partially
On
Always
On
90 mA
10
20
Full
Power
Save
Mode
10 mA
10
20
Deep
Sleep
Always
On
6 mA
15
25
Full
Power
Save
Mode
6 mA
15
25