Campbell CCFC Instruction Manual - page 45
CCFC Field Camera
34
continue recording the live video until the number of seconds has
elapsed.
Video pre-recording allows the camera to record up to 30 seconds
of video leading up to a related capture event. This feature can
only be used with external trigger and motion detect capture
events.
The use of pre-recording does impose some limitations on the
functionality available in the CCFC:
The pre-recording feature can only be used when the
camera is in the Fully On power mode.
If the file caption is Enabled in the Media Settings, it may
be used as part of the Pre-Record configuration and the
file caption will be visible in the Live Preview on the
Dashboard.
If both photo capture and video pre-recording are
configured for the same event, video recording takes
precedence. Only once the video has been recorded will
the photo capture occur.
The Video Duration is the total recorded video capture
length up to a maximum of 60 seconds. The Pre-Record
Duration is included in that total. For example, if a Pre-
Record Duration is set as 5 seconds and the total Video
Duration is 10 seconds, the first 5 seconds of the video
will be pre-recorded.
12.4.1 Timed Capture
Timed Capture is used to configure the camera to capture photos
or video using the CCFC internal clock.
Figure 12-8 Timed Capture