Campbell CCFC Instruction Manual - page 91
CCFC Field Camera
80
The camera can respond to RS-232 or RS-485 communication in
this mode.
Deep Sleep
Always On
The Deep Sleep power consumption (6mA typically) is not affected
by the Ethernet Power Mode.
Ethernet, RS-232 or RS-485 communications are non-responsive in
Deep Sleep mode.
Moderate
Power Save
Mode
Not recommended.
Full Power
Save Mode
The Deep Sleep power consumption (6 mA typically) is not affected
by the Ethernet Power Mode.
If Ethernet communications are not used this can reduce the power
consumption of the camera by 50mA when the camera exits the
Deep Sleep state.
Off State
Always On
The Off State power consumption (1 mA typically) is not affected
by the Ethernet Power Mode.
Ethernet, RS-232 and RS-485 communications are non-responsive
in the Off State.
Moderate
Power Save
Mode
Not recommended.
Full Power
Save Mode
The Off State power consumption (1 mA typically) is not affected by
the Ethernet Power Mode.
If Ethernet communications are not used, this can reduce the power
consumption of the camera by 50 mA when the camera exits the
Deep Sleep state.
See Section 12.8.4.2 Ethernet Power Mode for other
settings that influence power consumption.
Note