Campbell CCFC Instruction Manual - 8. Cables/wiring
CCFC Field Camera
A-1
less noticeable if the focus is adjusted closer to the camera’s
operating temperature.
Some lens options are unavailable when working in the extreme
cold. The zoom function disables below -30
°C and the focus
function disables below -35
°C. Note that these thresholds are
based on camera internal temperatures, which can be several
degrees warmer than ambient outdoor temperate. The camera will
continue to capture photos and video as set up, but the zoom and
focus features will not function. Check the internal temperature of
the camera using the Dashboard of the web interface (see Section
12.3 Dashboard).
7.5.4 Lens IR Cut Filter
The CCFC is internally equipped with an IR cut filter. The filter is
required to filter out near infrared light that can have an
undesirable effect on the photos.
8. Cables/Wiring
8.1 Power & I/O Cable Connections
The wiring for the Power & I/O Cableconnector assembly and
which wires need to be connected for the intended camera
application is as shown in Table 8-1 Power & I/O Cable
Connections. The wires can be terminated directly on the control
ports of a compatible datalogger (for compatible dataloggers see
Section 17 CCFC Compatibility).
It is essential that the black ground wire be connected
first when wiring the camera to the datalogger or other
power supply.
Note