Campbell CCFC Instruction Manual - page 81
CCFC Field Camera
70
12.8.2.3.2
Existing Network
The Wi-Fi settings information appears when the camera Wi-Fi is
configured to operate with an existing network. Typically, this
mode would be used when the camera is regularly connected to an
existing Wi-Fi network to transfer files or to eliminate the need to
connect a wired Ethernet cable.
Figure 12-31 Connect to Existing Network
The Scan For Networks button appears when the Access Mode is
in Existing Network. This button searches for nearby Wi-Fi access
points and displays a list. The list includes the name, address,
channel, signal strength, network, and encryption types. There are
also buttons which copy the selected AP information into the
configuration section for ease of use, which appear when the
Connected to Existing Network option is selected.
After performing a scan for Wi-Fi networks, the user can quickly
copy the selected network information into one of three client
settings by pressing the button in the result table. After this step,
if the Wi-Fi network is using encryption, the password must be
entered into the password box in order to connect.
Typically, this is all that is required to connect to a Wi-Fi
network, as nearly all networks supply configuration information
using DHCP. However, if necessary, the process can be done
manually.
When the camera tries to connect to a Wi-Fi network, it will
perform a scan and connect to the first network that is configured