Campbell CCFC Instruction Manual - page 52
CCFC Field Camera
A-1
Figure 12-11 External Trigger: Create New Profile
Table 12-6 External Trigger Variables for Photos
Variable
Allowable
Values
Description
Enable
+
Opens External Trigger:Create New Profile to add parameters.
Title
Text
Name the setting in order to navigate to it at a later date. Also
acts as a directory name in the File Explorer see section 12.7
File Explorer.
External
Trigger
Active High
Configures External Trigger to capture on a positive voltage.
Active Low
Configures the External Trigger to capture with 0 volts.
Lens Position
Checkbox
Select 1- 4 lens positions for the capture. See Section 12.5 Lens
Position. Selecting the green position title opens the Lens
Position modal.
Enable Photo
Capture
Toggle
Initiates the capture of photos and opens the photo capture
settings.
Take a Single
Photo
Set to capture one photo at the set time.
Take a Series of
Photos
Enter the Number of Images and Interval in Seconds (time
between photos) to create a photo burst. Maximum allowable
value is 60. This applies to each lens position, so with all 4 lens
positions activated, it will take 240 photos.