Campbell CCFC Instruction Manual - page 78
CCFC Field Camera
A-1
12.8.2.2 Wi-Fi Settings
The onboard Wi-Fi connection allows the camera to transmit files
without the need for a wired Ethernet connection. It acts as a way
to connect to the camera to configure the settings. The camera
does not relay network traffic between the Wi-Fi and wired
Ethernet connections, meaning a computer connected to the
camera’s Wi-Fi access point will not be able to access the wired
network.
The Wi-Fi on the camera can connect to an existing network or
become a Wi-Fi access point. By default, the camera Wi-Fi will
be set up as an access point with a name such as CCFC-1000,
where 1000 is the serial number of the camera. This allows the
user to quickly find and connect to the camera on the first power
up.
The CCFC does not currently support Wi-Fi protected
setup (WPS) as a configuration mechanism.
Figure 12-29 Wi-Fi Settings
As shown in Table 12-17 Wi-Fi Settings, there are two items on
the Network page under the camera’s Wi-Fi Settings to be aware
of.
Table 12-17 Wi-Fi Settings
Variable
Allowable
Values
Description
MAC
Address
Text
Provides the address of the Wi-Fi controller on
the camera. This address is different for existing
network and access point modes.
Access
Mode
Allows for control over the access points to the
camera through the Wi-Fi. Default setting is Wi-
Fi Access Point.
Note