L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 102
Targets And Target Management
4-43
Align North
Click this button to align north up and position the camera directly over the view.
Toggle Grid
Click this button to place a grid over the target data for estimating target
parameters.
Toggle Shadow
Click this button to place an arrow in the target window that indicates the sound
direction. The arrow is red when the direction is to port; green if to starboard.
Gain
Click this button to open the Target Properties dialog box to the Target Gain tab
shown in Figure 4-55 on page 4-41 where you can adjust the gain of the target data
being displayed.
Palette
Click this button to open the Target Properties dialog box to the Color Palette
Control tab shown in Figure 4-56 on page 4-42 where you adjust the color of the
target data being displayed.
Erase
Click this button to erase any measurement marks in the Target window.
Save
Click this button to save a target.
Save All
Click this button to save all targets. (See “Setting up the Target Preferences” on
page 4-51 for instructions on how to automatically save targets.)
Save Image
Click this button to save the target image in a GEOTIFF Image (.tif) or Windows
Bitmap (.bmp) file.