L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 110
Setting up the User Preferences
4-51
4.17.3 Setting up the Target Preferences
On the Target Preferences tab shown in Figure 4-65 you can set up the way
SonarPro handles the targets when they are displayed in the Target window and
how target information is handled and saved.
In the
Target Catalog
area of the Target Preferences tab, select the location for
saving the target catalogs that are generated. This can be a new catalog or a
previously generated catalog. The catalog must be located on a hard drive. If the
Survey Wizard was used when starting the survey, the location was selected at that
time. Click
Browse
to select or create the directory from the Save box.
In the
Reference Catalog
area you can optionally browse for historical targets
located on the computer hard drive. These targets can be used in the Navigation
window as a reference if you are resurveying an area. If the Survey Wizard was
used when starting the survey, the targets were selected at that time.
Figure 4-65:
The SonarPro User Preferences Dialog Box—Target
Preferences Tab