L3 Comminications SERIES 5000 Operation And Maintenance Manual - 4.7
4-12
CHAPTER 4 SonarPro Ver. 11.0 Operating Instructions
Series 5000 Sonar System Operations and Maintenance Manual
P/N 11210060, Rev. 13.0
4.7
Series 5000 Sonar System Towfish Setup
Towfish Setup
Click this button on the Real-Time tool bar to configure the towfish setup
parameters. The Sonar Interface dialog box will open to the System 5000 Control
tab as shown in Figure 4-15.
The System 5000 Control tab is the main control interface for the Series 5000
Sonar System. It is used to configure following towfish setup parameters:
Sonar Range.
The distance you want the sound to travel away from the
towfish.
Pulse Length.
Gives you a few default waveform settings for the output
sound waveforms. The optimum setting for the Series 5000 is
100 µsec chirp
.
Figure 4-15:
The Sonar Interface Dialog Box, Series 5000 Sonar
System—System 5000 Control Tab
NOTE
Much of the information provided in this section applies to both the
Series 3000 and Series 5000 Sonar Systems. However, for users of a Series
3000, refer also to“Series 3000 Sonar System Towfish Setup” on page 4-80.