L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 64
Selecting the Connection Type
4-5
When the settings in the TPU Connection dialog box have been made or verified,
click
OK
. The Run Survey Wizard dialog box shown in Figure 4-4 will open where
you are asked if you want to run the Survey Wizard. The Survey Wizard guides
you through setting up parameters for maintaining an orderly survey data file
structure. For instructions on how to use the Survey Wizard, refer to “Survey
Wizard” on page 4-7. Click
Yes
to run the Survey Wizard, or if you do not want to
run the Survey Wizard at this time, click
No
.
The Sonar Viewer window will open, along with the Scan and Information
windows in the Main window as shown in Figure 4-6. When operating in real time,
the Sonar Viewer window includes the Real-Time tool bar as shown in
Figure 4-27.
At the top of the Main window is the Scan window where you can monitor signal
strength. Below this window is the Sonar Viewer window. At the bottom of the
Main window, you have the Information window. Here you can monitor the
towfish and its position along the bottom and in the water column. On the right is
an area where you can open other windows, including the Navigation window
shown. If these windows do not open, you can open them from the Window menu.
Figure 4-3:
The Channels and Sensors Dialog Box
Figure 4-4:
The Run Survey Wizard Dialog Box
Figure 4-5:
The Real-Time Tool Bar