L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 134
Operating SonarPro with a Series 3000 Sonar System
4-75
To record sonar data, refer to “Recording Sonar Data” on page 4-17.
Ruler
Click this button to show or hide the ruler in the Sub Bottom Viewer window. The
ruler is displayed in cyan below the tool bar and has two scales. The top scale is a
fixed reference based on the range setting and is either in meters or in time,
depending on whether the
Distance
or
Time
option is selected on the Plan View
Configuration tab of the Sub Bottom Profiler Viewer Properties dialog box as
described below. The lower scale is variable. By adjusting the sliders on the top
scale, you can zoom in or out of any water column segment of the displayed sub
bottom profile data. Effectively, the left slider selects the distance or time from the
start of each scan to where or when the display of data starts. The right slider
selects the distance or time in each scan over which data are displayed. When
adjusting the sliders, the scaling of the lower scale adjusts automatically, and
double clicking either slider returns the lower scale to the range setting.
Display
Click this button to open the Sub Bottom Profiler Viewer Properties dialog box to
the Plan View Configuration tab as shown in Figure 4-87. You can set the
properties of the Sub Bottom Viewer window here.
Figure 4-86:
The Playback Tool Bar—Sub Bottom
Figure 4-87:
The Sub Bottom Profiler Viewer Properties Dialog Box—Plan View
Configuration Tab