L3 Comminications SERIES 5000 Operation And Maintenance Manual - 4.8
Monitoring and Setting the Information Alarms
4-15
Follow the directions in the wizard and play the animation to gain an
understanding for the procedure. The animation is shown in Figure 4-19. Once
started, the Compass Calibration Wizard must be completed. There will be a slight
time delay between pages within the wizard, as commands are sent to the towfish.
4.8
Monitoring and Setting the Information Alarms
4.8.1 Altitude Alarm
The
Towfish Altitude
display is located on the far right side of the Information
Window as shown in Figure 4-20. Here you can monitor the current distance
above the bottom that the towfish is flying.
To set a minimum towfish altitude alarm, left click the
Towfish Altitude
Display
area. The Towfish Altitude Display dialog box shown in Figure 4-21 will open. Set
the altitude threshold by entering a value in the
Altitude Threshold
text box and
enable the alarm (beep).
Figure 4-19:
The Compass Calibration Wizard Animation
Figure 4-20:
The Information Window