L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 70
Survey Wizard
4-11
On the Depth Sensor Scale page shown in Figure 4-14, you can specify a pressure
range for your pressure sensor. At the present time the Series 5000 towfish uses a
300 psi sensor, which is selected by default. This should not be changed unless
there is a custom sensor installed in the towfish. It is important that this setting be
correct, since it affects the depth reading. The Series 3000 towfish currently has a
default sensor of 1500 psi, and a optional 300 psi sensor. Select the appropriate
one. If the incorrect sensor is selected here, the operator can change the setting
within SonarPro once the program is launched and running by opening the Sensor
window and then doing a right-click, which will open the Sensor dialog box.
Figure 4-13:
The Survey Wizard—Session State Files Page
Figure 4-14:
The Survey Wizard—Depth Sensor Scale Page