L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 133
4-74
CHAPTER 4 SonarPro Ver. 11.0 Operating Instructions
Series 5000 Sonar System Operations and Maintenance Manual
P/N 11210060, Rev. 13.0
To operate SonarPro in real time, refer to “Operating in Real Time” on page 4-6.
When operating in real time, the Sub Bottom Viewer window includes the
real-time tool bar shown in Figure 4-85. Most of the buttons on this tool bar
function the same as those on the corresponding tool bar in the Sonar Viewer
window. However the
Ruler
,
Display
,
TVG
and
Palette
buttons each open the Sub
Bottom Profiler Viewer Properties dialog box where you can adjust the display
settings in the Sub Bottom Viewer window.
To operate SonarPro in playback, refer to “Operating in Playback” on page 4-20.
When operating in playback, the Sub Bottom Viewer window includes the
playback tool bar shown in Figure 4-86. Again, except for the
Ruler
,
Display
,
TVG
and
Palette
buttons, the buttons on this tool bar also function the same as those on
the corresponding tool bar in the Sonar Viewer window.
Figure 4-84:
Sonar and Sub Bottom Viewer Windows—Simultaneous
High Frequency Sonar and Chirp Sub Bottom Operation with the Series
3000 Sonar System
Figure 4-85:
The Real-Time Tool Bar—Sub Bottom