L3 Comminications SERIES 5000 Operation And Maintenance Manual - 4.6
Survey Wizard
4-7
4.6
Survey Wizard
Survey Wizard
Click this button to start the Survey Wizard. The Survey Wizard dialog box will
open to the Start page as shown in Figure 4-7.
The Survey Wizard will guide you through the following parameters:
• First enter a name for the current survey.
• Select a data directory.
• Specify a target catalog.
• Specify target parameters.
• Specify a survey grid waypoint file.
• Specify a session state file.
• Specify the sensor scale of the towfish being used.
Once the above has been checked or set up, click
Finish
. You will then have an
opportunity to print a summary of the setup information using the Snagit print
utility (check print preview).
On the Start page of the Survey Wizard, you are asked to enter a name for the
survey. This action gives the main folder a name in which to store the sonar data
files and sub folders, in this case Survey002, the default, as shown in Figure 4-8.
Figure 4-7:
The Survey Wizard Dialog Box—Start Page