L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 84
Operating in Playback
4-25
Select
Use Altitude from Towfish
to run with auto tracking on. This is the default
setting when starting SonarPro and should be used almost all of the time.
However, if conditions warrant, select
Use Manual Setting
to enable manual
altitude tracking or select
Use Altitude from Towfish plus Manual Offset
to enable
the sum of both auto and manual tracking. Once either of these two options is
selected, the
Manual Towfish Altitude Offset
scroll box becomes available where
you can enter an estimated altitude.
The altitude tracking lines in the Sonar Viewer window will change to the color
cyan; the
Towfish Altitude
display in the Information Window will also change to
cyan; and a display with a cyan background will appear in the Sonar Viewer
window tool bar indicating either "Manual Altitude" followed by the altitude for
the
Use Manual Setting
option or "Offset Altitude" followed by the altitude for the
Use Altitude from Towfish plus Manual Offset
option:
An example of the Sonar Viewer window with the manual altitude tracking
enabled is shown in Figure 4-34.
Figure 4-33:
The Sub Bottom Profiler Viewer Properties Dialog Box—Altitude
Tracker Tab