L3 Comminications SERIES 5000 Operation And Maintenance Manual - 4.20 Towfish Depth
4-62
CHAPTER 4 SonarPro Ver. 11.0 Operating Instructions
Series 5000 Sonar System Operations and Maintenance Manual
P/N 11210060, Rev. 13.0
Enter how often to poll the device in the
Poll Rate
text box and configure the port
using the drop-down list boxes in the
Port Configuration
area.
To save the new device, click
Save Device Parameters
. The new device will be
added to the
Cable Out Device Type
drop-down list box.
To save the cable out device settings to a file, choose Save Devices, to File from
the Session menu. To read the cable out device settings from a file, choose Open
Devices File from the Session menu.
4.20 Towfish Depth
Towfish Depth
Click this button to enter the depth output parameters. The Depth Output dialog
box will open as shown in Figure 4-73.
The current towfish depth can be output to a hardware device using an RS-232
serial port. Two predefined data formats are available: the ORE Trackpoint format,
and a standard NMEA DPT message format. Custom messages can also be defined
using the
Depth Output
dialog box.
Figure 4-73:
The Depth Output Dialog Box