L3 Comminications SERIES 5000 Operation And Maintenance Manual - page 111
4-52
CHAPTER 4 SonarPro Ver. 11.0 Operating Instructions
Series 5000 Sonar System Operations and Maintenance Manual
P/N 11210060, Rev. 13.0
In the
Copy Catalog
area you can optionally browse for and copy a set of targets
into the current target catalog.
In the Damaged Catalog area you can repair or rebuild a damaged target catalog.
In the
Which color palette should SonarPro use when new targets are created?
area, you can select the color palette to use for the target. When you create a target,
SonarPro generates the target in a color palette. The default color palette is the
same color palette as that used in the Sonar Viewer window. There may be
instances when you may want the target in a different color palette to highlight
different characteristics. You can choose to use the Sonar Viewer window palette
or the palette of the oldest or newest target.
You can change the prefix for the target names by entering it in the
Use this prefix
when naming targets
text box. If the Survey Wizard was used when starting the
survey, the prefix was entered at that time.
Targets can be stored on 4 different layers. These layers are displayed as different
colored targets in the Navigation window. This feature is useful if you have
previously surveyed an area and want to compare the targets from this survey with
the current survey. The most recent surveyed targets are placed on a separate layer
for easy comparison. If the Survey Wizard was used when starting the survey, the
layer was selected at that time.
You can save targets in the target catalog manually from the Target window, or
you can have SonarPro automatically save targets when they are generated. To
save them automatically, select the
Automatically Save Targets in the Target
Catalog When They Are Created
check box. In addition, when saving targets, you
can also select the
Automatically Save Targets in GeoTiff file format when Target
is saved
check box to save the targets to GeoTiff files—one file for each target—
with embedded georeferenced information. And you can select the
Save World
File (.tfw) when GeoTiff file saved
to automatically save an associated World File
(.tfw) with the GeoTiff file.
4.17.4 Arranging Windows
SonarPro Tile
Click this button to position the open windows in the Main window in a tile
arrangement.
Cascade Window
Click this button to position the open windows in the Main window in a cascade
arrangement.