Lantech LGS-2624C User manual - page 105
2-6.3 Port Group Fitering
The section describes that you could to set the Port Group Filtering in the
MLD Snooping function. On the UI that you could add new filtering group
and safty policy.
Web Interface
To configure the MLD Snooping Port Group Configuration in the web
interface:
1. Click Configuration, MLD Snooping, Port Group Filtering Configuration
2. Click the Add new Filtering Group
3. Specify the Filtering Groups with entries per page.
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
Delete
Check to delete the entry. It will be deleted during the next save.
Port
The logical port for the settings.
Filtering Groups
The IP Multicast Group that will be filtered.
Adding New Filtering Group