Lantech LGS-2624C User manual - 3. Security
3. Security
This chapter describes all of the switch security configuration tasks to
enhance the security of local network including IP Source Guard,
ARP Inspection,DHCP Snooping, AAA, and etc..
3-1 IP Source Guard
The section describes to configure the IP Source Guard detail parameters of
the switch. You could use the IP Source Guard configure to enable or disable
with the Port of the switch.
3-1.1 Configuration
This section describes how to configure IP Source Guard setting
including:
Mode (Enabled and Disabled)
Maximum Dynamic Clients (0, 1, 2, Unlimited)
Web Interface
To configure an IP Source Guard Configuration in the web interface:
1. Select
―Enabled‖ in the Mode of IP Source Guard Configuration.
2. Select
―Enabled‖ of the specific port in the Mode of Port Mode
Configuration.
3. Select Maximum Dynamic Clients (0, 1, 2, Unlimited) of the specific port
in the Mode of Port Mode Configuration.
4. Click Save.