Lantech LGS-2624C User manual - page 207
Manual is about: 20 10/100/1000T + 4 100/1000M
SFP Combo + 2 100/1000M SFP L2
Plus Managed Switch
of
279
3-2.3 Dynamic Table
The section describes to configure the Dynamic ARP Inspection Table
parameters of the switch. The Dynamic ARP Inspection Table contains up to
1024 entries, and is sorted first by port, then by VLAN ID, then by MAC
address, and then by IP address.
Web Interface
To configure a Dynamic ARP Inspection Table Configuration in the web
interface:
1. Specify the Start from port, VLAN ID, MAC Address, IP Address, and
entrie per page.
2. Checked
―Auto-reflash‖.
.
Parameter description:
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
User IP address of the entry.