Lantech LGS-2624C User manual - page 154
Parameter description:
Delete
To delete a MAC-based VLAN entry, check this box and press save. The
entry will be deleted on the selected switch in the stack.
MAC Address
Indicates the MAC address.
VLAN ID
Indicates the VLAN ID.
Port Members
A row of check boxes for each port is displayed for each MAC-based VLAN
entry. To include a port in a MAC-based VLAN, check the box. To remove or
exclude the port from the MAC-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New MAC-based VLAN
Click to add a new MAC-based VLAN entry. An empty row is added to the
table, and the MAC-based VLAN entry can be configured as needed. Any
unicast MAC address can be configured for the MAC-based VLAN entry. No
broadcast or multicast MAC addresses are allowed. Legal values for a
VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled on the selected stack switch unit
when you click on "Save". A MAC-based VLAN without any port members
on any stack unit will be deleted when you click "Save".
The button can be used to undo the addition of new MAC-based VLANs.