Lantech LGS-2624C User manual - page 202
Manual is about: 20 10/100/1000T + 4 100/1000M
SFP Combo + 2 100/1000M SFP L2
Plus Managed Switch
of
279
Parameter description:
Mode of IP Source Guard Configuration
Enable the Global IP Source Guard or disable the Global IP Source Guard.
All configured ACEs will be lost when the mode is enabled.
Port Mode Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global
Mode and Port Mode on a given port are enabled, IP Source Guard is
enabled on this given port.
Max Dynamic Clients
Specify the maximum number of dynamic clients that can be learned on
given port. This value can be 0, 1, 2 or unlimited. If the port mode is
enabled and the value of max dynamic client is equal to 0, it means only
allow the IP packets forwarding that are matched in static entries on the
specific port.