Lantech LGS-2624C User manual - page 95
2-5.4 Status
After you complete the IGMP Snooping configuration, then you could to let
the switch display the IGMP Snooping Status. The Section provides you to
let switch to display the IGMP Snooping detail status.
Web Interface
To display the IGMP Snooping status in the web interface:
1. Click Configuration, IGMP Snooping, Status
2. If you want to auto-refresh the information then you need to evoke the
―Auto-refresh‖.
3.
Click ― Refresh― to refresh the IGMP Snooping Status.
4. Click
― Clear― to clear the IGMP Snooping Status.
Parameter description:
VLAN ID
The VLAN ID of the entry.
Querier Version
Working Querier Version currently.
Host Version
Working Host Version currently.
Querier Status
Shows the Querier status is "ACTIVE" or "IDLE".
Queries Transmitted
The number of Transmitted Queries.
Queries Received