Lantech LGS-2624C User manual - page 243
3-8 Acess Management
This section shows you to configure access management table of the
Switch including HTTP/HTTPS, SNMP, and TELNET/SSH. You can manage
the Switch over an Ethernet LAN, or over the Internet.
3-8.1 Configuration
This section shows you how to configure access management table of the
Switch. The maximum entry number is 16. If the application's type match
any one of the access management entries, it will allow access to the
switch.
Web Interface
To configure a Access Management Configuration in the web interface:
1. Select
―Enabled‖ in the Mode of
Access Management
Configuration.
2. Click
―Add new entry‖.
3. Specify the Start IP Address, End IP Address.
4. Checked Access Managemnet method (HTTP/HTTPS, SNMP,
and TELNET/SSH) in the entry.
5. Click Save.
Parameter description:
Mode
Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Delete
Check to delete the entry. It will be deleted during the next save.
Start IP address
Indicates the start IP address for the access management entry.