Lantech LGS-2624C User manual - page 87
2-4.7 Port Status
After you complete the STP configuration the you could to ask the switch
display the STP Port Status. The Section provides you to ask switch to
display the STP CIST port status for physical ports of the currently selected
switch.:
Web Interface
To display the STP Port status in the web interface:
1. Click Configuration, Spanning Tree, STP Port Status
2. If you want to auto-refresh the information then you need to evoke the
―Auto-refresh‖.
3.
Click ― Refresh― to refresh the STP Bridges.
Parameter description:
Port
The switch port number of the logical STP port.
CIST Role
The current STP port role of the CIST port. The port role can be one of the
following values: AlternatePort BackupPort RootPort DesignatedPort
Disabled.
CIST State
The current STP port state of the CIST port. The port state can be one of
the following values: Blocking Learning Forwarding.
Uptime
The time since the bridge port was last initialized.