Lantech LGS-2624C User manual - page 192
Action Configuration
Class QoS Class: "class (0-7)", default- basic classification
DP Valid DP Level can be (0-3)", default- basic classification
DSCP Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43)
2-16.10 QCL Status
The section will let you know how to configure and shows the QCL status
by different QCL users. Each row describes the QCE that is defined. It is a
conflict if a specific QCE is not applied to the hardware due to hardware
limitations. The maximum number of QCEs is 256 on each switch.
Web Interface
To display the QoS Control List Status in the web interface:
1. Click Configuration, QoS , QCL Status
2. If you want to auto-refresh the information then you need to evoke the
―Auto-refresh‖.
3. Scroll to select the combined, static, Voice VLAN and conflict.
4. To Click the
― Refresh― to refresh a entry of the MVR Statistics
Information.
Parameter description:
User
Indicates the QCL user.
QCE#
Indicates the index of QCE.
Frame Type
Indicates the type of frame to look for incomming frames. Possible frame
types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
LLC: Only (LLC) frames are allowed.
LLC: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
Port
Indicates the list of ports configured with the QCE.