Lantech LGS-2624C User manual - page 226
3-5.3 Port Status
The section describes to provides detailed NAS statistics for a specific
switch port running EAPOL-based IEEE 802.1X authentication.
Web Interface
To configure a NAS Port Status Configuration in the web interface:
1. Specify Port which want to check.
2. Checked
―Auto-reflash‖.
Parameter description:
Port State
Admin State
The port's current administrative state. Refer to NAS Admin State for a
description of possible values.
Port State
The current state of the port. Refer to NAS Port State for a description of
the individual states.
QoS Class
The QoS class assigned by the RADIUS server. The field is blank if no QoS
class is assigned.
Port VLAN ID
The VLAN ID that NAS has put the port in. The field is blank, if the Port
VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is
appended to the VLAN ID. Read more about RADIUS-assigned VLANs
here.
If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN
ID. Read more about Guest VLANs here.
Port Counters