Lantech LGS-2624C User manual - page 109
Information Table are shown on this page. The MLDv2 Information Table is
sorted first by VLAN ID, then by group, and then by Port No. Diffrent source
addresses belong to the same group are treated as single entry.
Each page shows up to 64 entries from the MLDv2 SSM (Source Specific
Multicast) Information table, default being 20, selected through the "entries
per page" input field. When first visited, the web page will show the first 20
entries from the beginning of the MLDv2 Information Table. The "Start from
VLAN", and "group" input fields allow the user to select the starting point in
the MLDv2 Information Table.
Web Interface
To display the MLDv2 IPv6 SSM Information in the web interface:
1. Click Configuration, MLD Snooping, IPv6 SSM Information
2. If you want to auto-refresh the information then you need to evoke the
―Auto-refresh‖.
3.
Click ― Refresh― to refresh a entry of the MLDv2 IPv6 SSM Information.
4. Click
―<< or >> ― to move to previous or next entry.
Parameter description:
MLDv2 Information Table Columns
VLAN ID
VLAN ID of the group.
Group
Group address of the group displayed.
Port
Switch port number.
Mode
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
Source Address
IP Address of the source. Currently, system limits the total number of IP