Lantech LGS-2624C User manual - page 205
3-2 ARP Insprction
The section describes to configure the ARP Inspection parameters of the
switch. You could use the ARP Inspection configure to manage the ARP
table.
3-2.1 Configuration
This section describes how to configure ARP Inspection setting including:
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
Web Interface
To configure an ARP Inspection Configuration in the web interface:
1. Select
―Enabled‖ in the Mode of ARP Inspection Configuration.
2. Select
―Enabled‖ of the specific port in the Mode of Port Mode
Configuration.
3. Click Save.
Parameter description:
Mode of ARP Inspection Configuration
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Port Mode Configuration
Specify ARP Inspection is enabled on which ports. Only when both Global
Mode and Port Mode on a given port are enabled, ARP Inspection is
enabled on this given port.