Lantech LGS-2624C User manual - page 187
2-16.8 DSCP Classification
The section describes to teach user to configure and allows you to map
DSCP value to a QoS Class and DPL value. Others the settings relate to
the currently selected stack unit, as reflected by the page header.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1.Click Configuration, QoS, DSCP Translation
2. Scroll to set the DSCP Parameters
3. Click the save to save the setting
4. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
QoS Class
Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be
mapped to followed parameters.
DPL
Drop Precedence Level (0-1) can be configured for all available QoS
Classes.
DSCP
Select DSCP value (0-63) from DSCP menu to map DSCP to
corresponding QoS Class
and DPL value