Lantech LGS-2624C User manual - page 24
1-3.1.1 Add User
This page configures a user.The switch provide add different user.
Web Interface
To configure Account in the web interface:
1. Click SYSTEM, Account, Users,Add new user
2. Specify the User Name, Password parameter.
3. Click Save.
Parameter description:
User Name
The name identifying the user.
Password
The password of the user.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the
privilege level value is 15, it can access all groups, i.e. that is granted the
fully control of the device. But others value need to refer to each group
privilege level. User's privilege should be same or greater than the group
privilege level to have the access of that group. By default setting, most
groups privilege level 5 has the read-only access and privilege level 10 has
the read-write access. And the system maintenance (software upload,
factory defaults and etc.) need user privilege level 15. Generally, the
privilege level 15 can be used for an administrator account, privilege level
10 for a standard user account and privilege level 5 for a guest account.