Lantech LGS-2624C User manual - page 151
Port Members
A row of check boxes for each port is displayed for each private VLAN ID.
To include a port in a Private VLAN, check the box. To remove or exclude
the port from the Private VLAN, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Adding a New Private VLAN
Click to add a new private VLAN ID. An empty row is added to the table,
and the private VLAN can be configured as needed. The allowed range for
a private VLAN ID is the same as the switch port number range. Any values
outside this range are not accepted, and a warning message appears. Click
"OK" to discard the incorrect entry, or click "Cancel" to return to the editing
and make a correction.
The Private VLAN is enabled when you click "Save".
The button can be used to undo the addition of new Private VLANs.