Lantech LGS-2624C User manual - page 233
3-6.2 Radius Overview
This section shows you
an overview of the RADIUS Authentication and
Accounting servers status to ensure the function is workable.
Web Interface
To configure a RADIUS Overview Configuration in the web interface:
1. Checked
―Auto-reflash‖.
Parameter description:
#
The RADIUS server number. Click to navigate to detailed statistics for this
server.
IP Address
The IP address and UDP port number (in
notation) of this server.
State
The current state of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and
running.
Ready: The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number
of seconds left before this occurs is displayed in parentheses. This state is
only reachable when more than one server is enabled.