Lantech LGS-2624C User manual - page 182
2-16.5 Port DSCP
The section will teach user to set the QoS Port DSCP configuration that
was allowed you to configure the basic QoS Port DSCP Configuration
settings for all switch ports. Others the settings relate to the currently
selected stack unit, as reflected by the page header.
Web Interface
To configure the QoS Port DSCP parameters in the web interface:
1. Click Configuration, QoS, Port DSCP
2. Evoke to enable or disable the Ingress Translate and Scroll the Classify
Parameter configuration
3. Scroll to select Egress Rewrite parameters
4. Click the save to save the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
Port
The Port coulmn shows the list of ports for which you can configure dscp
ingress and egress settings.
Ingress
In Ingress settings you can change ingress translation and classification
settings for individual ports.
There are two configuration parameters available in Ingress:
1. Translate
2. Classify