Lantech LGS-2624C User manual - page 36
Manual is about: 20 10/100/1000T + 4 100/1000M
SFP Combo + 2 100/1000M SFP L2
Plus Managed Switch
of
279
Parameter description:
These parameters are displayed on the SNMP System Configuration page:]
SNMP State -The term SNMP here The term SNMP here is used for the
activation or de-activation of SNMP.
Enable: Enable SNMP state operation.
Disable: Disable SNMP state operation.
Default: Enable.
Engine ID - SNMPv3 engine ID. syntax: 0-9,a-f,A-F, min 5 octet,
max 32 octet, fifth octet can't input 00. IF change the Engine ID
that will clear all original user.