Lantech LGS-2624C User manual - page 203
3-1.2 Static Table
The section describes to configure the Static IP Source Guard Table
parameters of the switch. You could use the Static IP Source Guard Table
configure to manage the entries.
Web Interface
To configure a
Static IP Source Guard Table Configuration in the web
interface:
1. Click
―Add new entry‖.
2. Specify the Port, VLAN ID, IP Address, and MAC address in the entry.
3. Click Save.
Parameter description:
Delete
Check to delete the entry. It will be deleted during the next save.
Port
The logical port for the settings.
VLAN ID
The vlan id for the settings.
IP Address
Allowed Source IP address.
IP Mask
It can be used for calculating the allowed network with IP address.
MAC address
Allowed Source MAC address.
Adding new entry
Click to add a new entry to the Static IP Source Guard table. Specify the
Port, VLAN ID, IP address, and IP Mask for the new entry. Click "Save".