QuVIS Acuity User Manual - page 108

SETUP CONFIG (1/8) menu page 

This menu page provides control over the system settings as well as provides access to advanced features such as 

CineGUI. From this menu page system settings may be saved to a configuration file for later use or a previous 

setup may be loaded from an existing Acuity Configuration File. Every setting that is controlled from the GUI can be 

saved to a configuration file (with exception of the Ethernet settings – as those are saved in NVM). 

The GUI setup settings will be saved to a file located in the user/cfg directory with a file extension of .CFG. The 

Acuity will ship with an write protected configuration file (cannot be deleted) called Factory.cfg, which can be used 

to restore the system settings to their default factory values. See 

Chapter 5 – Modifying Configuration

 for details on 

using configuration files.

Setup Config Options 

Description 

This control sets the default configuration file to be used by the Acuity at 

startup. When Acuity starts, it looks for this file and loads the settings 

specified within the file. If the specified config file cannot be loaded, 

Acuity will load its factory defaults. 

Default Startup Config File 

This control is used to load a previously saved configuration file. The 

popup file browser will automatically set the current working directory to 

the location of the configuration, the OS:user/cfg directory. 

Load Config File 

This control is used to save the current settings to a configuration file. All 

configuration files saved by the user will be stored in the /user/cfg 

directory on the Acuity’s system volume. 

Save Current Setup to Config 

File 

Use this toggle to make certain advanced options user-adjustable 

(Enabled) or protected (Disabled). Advanced features that are disabled 

are grayed out and may not be selected until this control is Enabled. 

Advanced features in GUI 

This button is used to open the cinema-style interface, CineGUI, for 

QScript playback. Opening the CineGUI interface will shut down the 

current GUI session and all unsaved settings will be reset upon GUI 

restart.  

Jump to CineGUI 

Once CineGUI is loaded, you may return to these menu pages by 

pressing the Exit button. 

Advanced Setup 

This button is used to activate a set of advanced setup menu pages. The 

controls found on these menu pages are in most cases infrequently 

modified. You may also navigate directly to the Advanced Setup menu 

QuVIS Acuity

™  

Page 107 

QSR Version 3.3