QuVIS Acuity User Manual - page 50
Account Management
Account management is available only via the ACCOUNT QShell (command line) utility. The ACCOUNT command
may be used to LIST users, ADD new accounts, DELETE existing accounts, ENABLE account, DISABLE account,
IMPORT accounts from an existing “users” file, and turn ON|OFF the security system. For usage details for the
Account command, refer to the “QShell Command Reference Manual”.
Note: The system will prevent you from activating system (account) security if an Admin user has not been defined.
Account security may be enabled/disabled only using an ADMIN level user account.
Login from the front-panel GUI
With System Security active, the operator must login to gain access to the front panel GUI. The steps required to
login are graphically depicted below.
1. Place the pointer on “Login” button, located in the center of the screen, and press the center touchpad button.
2. Enter the User name in the dialog window provided. Click on Okay to continue to the next step.
3. Enter the password for the user account specified in the previous step. Click on Okay to complete the login
operation.
QuVIS Acuity
™
Page 49
QSR Version 3.3