QuVIS Acuity User Manual - Record Menu Group
RECORD menu group
The RECORD menu group is the collection of menu pages that are used to configure the QuVIS Acuity to record
video, audio and metadata (including timecode) from an external source (Telecine, camera, VTR, etc.).
Menu pages covered in this section include:
•
RECORD VIDEO (1/5) menu page
•
RECORD VIDEO ADV (2/5) menu page
•
RECORD AUDIO (3/5) menu page
•
RECORD ADVANCED (4/5) menu page
•
RECORD PANEL (5/5) menu page
•
RECORD PANEL (after recording a clip) menu page
•
2K DCI JPEG2000 Recording Overview
TIP: A message line is located at the bottom of each record setup menu page in order to provide visual
confirmation that the selected record settings are not in conflict with each other.
If the selected settings are compatible with the systems capabilities, the message will read “(OK to record)”.
If the selected settings are not compatible with dependent settings, the message will indicate that there is a
setup problem to be corrected. Additionally, the affected settings will be displayed in red text.
Keep in mind that if you only see one setting on a menu page that is listed in red, the other setting it conflicts with
may be on a different RECORD menu page.
QuVIS Acuity
™
Page 91
QSR Version 3.3