QuVIS Acuity User Manual - page 66
VTR buttons (above wheel)
Description
The STOP button is used to halt playback of a media file.
However, if the playstyle is set to Play jog/shuttle, the first press of the
STOP button will PAUSE playback. From there playback may be resumed
by pressing the PLAY button. To unload the clip while playback is paused,
press the STOP button.
STOP
REV
The REV button is used to shuttle or frame-advance backwards through
the clip or media file currently under Jog/Shuttle control. Each additional
button press will increase playback speed in the reverse direction.
If the system is not playing or recording a clip, the REV button can be
used to cycle backwards through the GUI menu pages of the active menu
group.
PLAY
The PLAY button is used to begin playback or resume playback of the
selected clip(s).
If the system is not playing or recording a clip, this button may be used as
a GUI shortcut to load the PLAY menu group.
FWD
The FWD button is used to shuttle or frame-advance forward through the
clip or media file currently under Jog/Shuttle control. Each additional
button press will increase playback speed in the forward direction.
If the system is not playing or recording a clip, the REV button can be
used to cycle backwards through the GUI menu pages of the active menu
group.
REC
The REC button is used to load record settings and place the system in
the Record-ready state. To start recording, the REC+PLAY key
combination must be used.
If the system is not playing or recording a clip, this button may be used as
a GUI shortcut to load the RECORD menu group.
REC+PLAY
This button combination is used to start recording a clip from the front
panel.
QuVIS Acuity
™
Page 65
QSR Version 3.3