QuVIS Acuity User Manual - page 69
created or updated. Config (configuration) files allow the operators to store different setting profiles based upon
project type or individual operator. See Setup Config menu page for config file options.
Change Soft Button Global Assignment
1. Load the Setup GUI menu page.
2. Click (center touch pad button or left mouse click) on the Soft button control in the DEFAULT SOFT BUTTONS
section.
3. From the menu page listing, select the menu page to be assigned to the soft button. Complete the selection by
pressing the center touch pad button (or left mouse click).
IMPORTANT! In order to retain Soft button assignments between sessions custom assignments must be saved in a
Configuration file.
Temporary Soft Button Assignments
The ability to temporarily assign individual menu page functions to soft buttons that temporarily override the global
assignments, made on the Setup GUI menu page, is supported. To assign a specific menu page function (or
dashboard item – e.g. Read Log), place the cursor over the desired function, press the round touchpad button (so
that “Assign” is displayed in the lower right corner of the GUI) and press the soft button you want to assign the
function to.
IMPORTANT! Temporary soft button assignments for menu page functions are not savable and will be reset to their
global values (defined on Setup GUI menu page) when the server’s power is cycled.
QuVIS Acuity
™
Page 68
QSR Version 3.3