QuVIS Acuity User Manual - page 97

Record Video Adv Options 

Description 

Timecode 

Select which timecode input source should be used for recorded 

timecode. Choices include the LTC input or the Internal timecode clock. 

Drop Frame Mode 

This control allows you to select either the default timecode type that is 

built-in to the selected image format or override the default setting. 

Choices include: 

Format Default – the timecode type (drop or non-drop frame) is 

determined by the selected image format and will change appropriately 

when the image format is changed. 

Non-drop – this override setting will force the system to always record 

non-drop frame timecode (1/1000) regardless of the timecode type 

defined by the selected image format. 

Drop – this override setting will force the system to always record drop-

frame timecode (1/1001) regardless of the timecode type defined by 

the selected image format. 

3D Format 

This control instructs the server if the incoming 4:4:4:4 video stream 

will be recorded as a 3D signal.   

IMPORTANT! This option is to only be used when recording 3D QPE 

content.  

QuVIS Acuity

™  

Page 96 

QSR Version 3.3