QuVIS Acuity User Manual - page 27
Select Audio Input Settings
1.
Navigate to the Record Audio menu page.
2.
If required, modify audio input settings.
a.
Audio form may only be used when the Clip form is set to “expanded”. This control is used to define
the way each channel of audio is stored, typically only done in an editing environment. Choices
include:
Audio Cluster (grouped channels) – A single file is used to store all selected audio channels.
Audio Tracks (discrete channels) – A separate file is used to store each selected channel of audio.
b.
Use the Digital audio inputs and Analog audio inputs to specify which audio channels should be
recorded and whether channels 1 and 2 should be analog or digital.
c.
If channels 1 and 2 are selected to be analog channels, the Levelcontrol is used to set the level of
attenuation for the analog channels.
d.
Select the Resolutionof the recorded audio signal. Choices include 16, 20 and 24 bit.
e.
Select the sampling Frequencyof the recorded audio signal. Choices include 44.1 kHz or 48 kHz.
f.
Select the audio Format.
The Wave audio format is required for JPEG2000 record projects.
g.
If necessary, use the Input audio delay to set the number of frames needed to compensate for audio
routing.
QuVIS Acuity
™
Page 26
QSR Version 3.3