QuVIS Acuity User Manual - Server Status Web Page
Server Status Web Page
The QuVIS Acuity is configured with an internal web server that allows an operator to view a summary of system
information from a set of server web pages.
To view the server status web pages, enter the server’s IP address in Address bar of your web browser.
Note: The information on the Status web page is not automatically updated after the web page is loaded. To update
the information on the web page use the web browser’s Refresh option (e.g. F5 function key).
Status web page links
There are seven categories of status information that can be viewed from the server’s status webpage:
Summary – displays general server information and its current operational status.
Disks – displays a list of mounted storage volumes and their usage properties.
Stats – displays a summary of the system Log including statistics on the number of messages recorded in the
log. The same information can be viewed via command line (serial or Telnet session) by issuing the “Log stats”
command.
Temps – displays the current values of the internal temperature sensors.
Connections – displays local and remote-based (network) connections to the Acuity.
Network – displays a summary list of network settings including network address information and link status.
Logs – displays unread messages stored in the system Log.
QuVIS Acuity
™
Page 63
QSR Version 3.3